Check that you have everything you need to start before installing SimpliSafe Outdoor Camera.
For the Wireless Outdoor Security Camera to install, you will need the following:
- The most recent version of the SimpliSafe Base Station and Keypad with the latest software (check your Keypad for firmware updates).
- The SimpliSafe mobile app for
- This is a screwdriver for fixing on wood or vinyl.
- A 7/64-inch drill bit for putting on tile, brick, or stucco
- USB charger that works (5V, 7.5W+, 1.5A+, not included)
- A network link at 2.4GHz
Note: the Outdoor Camera works best in temperatures between -4°F and 122°F.
The Steps To Install SimpliSafe Outdoor Camera in your house (Outside and Inside)
Download The SimpliSafe Camera App
Also, before you start the downloading process, you should fully charge the battery in your camera. Ok, now you are ready to install your SimpliSafe outdoor security camera.
The Battery
The battery could take up to 5 or 6 hours to fully charge. Once all three lights on the battery are on and not flashing, you’ll know it’s fully charged. Then, insert the battery into the camera and twist the cap back on. You will hear the confirmation tone that your battery is inserted correctly.
The Base Station
For the next step, open the SimpliSafe app and also makesure your base station is connected to WIFI. Additionally, your base station is up-to-date with latest firmware. You can check this on your keypad. Makesure your base station and Wi-Fi is near to each other. Follow the instruction on the app until you reach this screen.
Press setup button on the back of your camera. The base station will give you a voice over that camera has been added to the system. Then the app will ask you to name the camera.
After successfully connecting to the camera, the app will allow you a live video.
The Steps To Mount SimpliSafe Outdoor Camera in your house (Outside and Inside)
For optimum performance place your cameras six to eight feet high and angle it about 30 degrees down. If you camera are working indoors but not outdoors, you may need a wifi extender. You can install a camera in normal or upside down directions.
But please note: the motion detection feature will be impacted, if it is installed upside down. The camera can detect motion within 30 feet if it is installed in the upright position. If you will install your SimpliSafe camera in the upside down it will detect motion within 15 feet.
If you are installing the camera near a tree. Make sure there won’t be moving things like a tree brunch. As it may trigger motion detection.
Time To Mount In SimpliSafe Outdoor Camera
Now if you have found the perfect location to install SimpliSafe camera; its time to mount in.
To Mount on Wood
For wood, twist off the cap and use a handheld screw driver to screw the cap directly to the wall. Using the self tapping screws.
To Mount on Bricks, Stucco or Tiles
Pre-drill two holes in you wall using a 7/64″ bit and use the included wall anchors. Then twist dome back on the cap. The dome is magnetic, so just pop your camera on top and adjust in the direction which you want to monitor.
Conclusion
We write the complete guide to install the simplisafe outdoor security camera in your house. Additionally image guide is also provided in the article. By following the steps, your camera is installed. Now just twist your camera left and right to adjust the angle.