Hide your security camera wires to extend their longevity by shielding them from the exposure, including sun, wind, rain, and even squirrels and birds. Not only may exposed and dangling security camera wires ruin your home’s visual appearance, but they also present a prime opportunity for burglars to cut the hanging connections and disconnect your cameras.
Fortunately, you can extend the life of the security camera cabling and protect your security systems from vandalism by hiding the cables inside and outside. This may be done in several easy and affordable ways.
By installing security cameras, you may have piece of mind and keep an eye out for unauthorized visits to your house. However, having cables trailing and hanging over your walls can make your security system more noticeable, giving would-be thieves the chance to cut the wiring and take out your surveillance cameras.
You can keep your security system safer by hiding the wires leading to your security cameras.
7 Steps To Hide Security Camera Wires Outside
Your security camera will, at the absolute least, have a power cable unless it is a wireless model. Aside from ensuring that the line fits from the port to the camera, you must also ensure it is protected from outside influences and intruders. Now, let’s dig into how to hide security camera wires outside.
1. Paint The Wires With Weather Shield Paint Spray
The majority of security camera cables are either black, gray, or white. They stand out more against housing that has a distinct tone thanks to these colors. You can get spray paint that is suitable for plastics at a hardware shop, matching the siding or building material of your house. Disconnect the cord and paint it when you get home. To reduce the possibility of spills, ensure that the paint dries completely before plugging in the cable or powering on the appliance.
2. Hide The Cables in Walls Or Ceiling
This is a more permanent solution that may involve the services of an electrician and tools. You must drill at least two holes in your wall and pass through the wires to conceal cables inside. Hide and shield cables from the weather with this great solution. Make sure you turn off your circuit breaker before beginning any DIY projects.
3. Hide Wires With Baseboards
The thin wooden boards that run the lowest wall length are called baseboards. Using this strategy is particularly simple if your home has an adequate number of doorways.
- Fish the cables in the space between the wall and the floor after removing the baseboards. After that, replace the baseboards and check that the wires are properly placed.
- In addition to the baseboards, the security camera wiring can be concealed under the carpet or behind some sizable furniture items like bookcases and mantels.
- Before attaching the hanging wires with binder clips behind the adjacent components, such as the bookshelves, you can arrange the wiring route.
4. Use a Plastic Tube
Feeding the security camera cables through buildings in a plastic tube is another efficient way to conceal them outdoors. This method also helps shield the wires from inclement weather and other exterior harm.
- This technique requires threading the tube and drilling through studs, which could be difficult if you need to be tech-aware. Therefore, if it’s more than you can handle alone, give a skilled installer a call.
- It should be noted that in the event of a power outage, the wires will be nearly impossible to access unless you have expert assistance.
5. Use Conduits
Wires run through conduits are safe from weather, animals, and malevolent intent. Although they could be coated to blend in, the conduits would still be noticeable against the walls. Conduits are only sometimes simple to install. Therefore, you might need to employ an expert to accomplish it.
6. Use a Junction Box
If you pick a spot close to the hub of your CCTV system, you can drill right through the house and hide the awkward wiring sections with a junction box. There is no need to bother about the outside wire installation because the cables flow right into the junction box and the house.
7. Replacing your Wired Cameras With Wireless Security Cameras
The best defense against your security camera is to have no wires at all. Use a wire-free camera, and don’t worry about painting, concealing, or tucking away cords. Since they are already waterproof, placing outdoor security cameras higher lowers the possibility of tampering.
You may get rid of tangled wires and difficult installation procedures with wireless security cameras, which are run by solar panels or batteries and direct adopter power supply. Keep in mind that not all wireless security cameras are wire-free. To power the wireless IP cameras plugged in, wires must also be run.
Conclusion
Although it may seem like a hassle, hiding the wires of your security cameras has more advantages than disadvantages. Your home will be secure even while you’re not there if you take the time to plan and install your wiring appropriately. This will also extend their longevity. You’ll be safer from unauthorized activity on your camera if you follow these seven tips for concealing and securing outside security cables.